About Us

THE COATING THAT CHANGED THE WORLD

HydroSilex is a multinational company with a multinational board and branches all over the world. With over 25 years of experience in the chemical industry we knew that we had a winner this time. Our objective and vision is to create the best and most user-friendly products on the market. Our team is growing rapidly and we welcome inquiries from anyone wanting to join our team. We are currently looking for distributors in Europe and Asia. contact@hydrosilex.com

HOW TO USE


Foam cannon dispenser

Don’t wash or coat your car in the sun!

  1. Wash the car. Use PH neutral soap. We recommend Americana’s soap.
  2. First time application: To achieve best results, use a clay bar to make sure the car is free of contaminants stuck in the paint.
  3. Leave the car wet but free from soap
  4. Unscrew the lid from the dispenser and connect it to the foam cannon.
  5. Set the foam gun on the lowest level of soap release.
  6. Shoot one panel until you see the water turning into small beads. Once you see it beading you move to next panel. There is no surface on the car that should be coated so fire away! You should not be using more than half of the liquid (8 Oz) to do a full-size sedan.
  7. Rinse the car using high pressure immediately after with normal water
  8. Dry the car normally with clean microfiber towels

Hand Spray

Don’t wash or coat your car in the sun!
 

  1. Wash the car. Use PH neutral soap. We recommend Americana’s soap.
  2. First time application: To achieve best results, use a clay bar, we recommend xxxx, to make sure the car is free of contaminants stuck in the paint.
  3. Leave the car wet but free from soap
  4. Spray on one panel until you see the water turning into small beads. Once you see it beading you move to next panel. There is no surface on the car that should be coated so spray away! You should not be using more than half of the liquid (8 Oz) to do a full-size sedan.
  5. Rinse the car using high pressure immediately after with normal water.
  6. Make sure you rinse the coated surface with water before the coating dries. If it dries you will see high spots in the paint, These high spots will go away with a microfiber towel and some elbow grease.  
  7. Dry the car normally with clean microfiber towels
This product is the coolest product ever. Your first ever DIY automotive coating. It is simple. Our blue magic bonds with water from your hose! It is the coolest thing of all time.