fully DIY.

no professional installation needed.

simple, quick and flawless.


Application

Recharge Application
1. Spray an even mist onto a clean, dry, cool surface. One small panel/section at a time. 
2. Immediately buff with a clean microfiber towel in a waving motion. 
3. Follow up with a second light buff using another clean microfiber towel in a waving motion.

Rewind Application
1. Spray an even mist onto a clean, dry surface. 
2. Use high quality clean microfiber towels and buff free of residue.

Silica Soap
1. Use 1 oz of Silica Soap per wash bucket or foam cannon and top up with warm water. 2. Wash car as normal with a foam cannon or by hand using a sponge and dry the surface with a clean microfiber towel.

Marine Application
1. Spray an even mist onto a clean, dry surface. One small panel/section at a time. 
2. Immediately buff with a clean microfiber towel in a waving motion. 
3. Follow up with a second light buff using another clean microfiber towel in a waving motion.

Slick Application
1. Clean the tire thoroughly with HydroSilex Rewind or a high quality tire cleaner. 
2. Apply Slick to an applicator. 
3. Wipe on evenly. 
4. Smooth down any streaks or drips. 
5. Allow to dry 30 mins before using vehicle. Allow 24 hours to dry before driving in rain. For ultimate gloss and shine, apply 2 coats.

Application Reminders
1. Apply to a clean, cool, dry surface, clear from any wax or sealant residue. 
2. Apply to one panel/section at a time. Always use a waving motion when buffing. 
3. Do not allow Recharge or Marine to self-dry on the surface. 
4. You can apply Recharge to all surfaces on the vehicle; paint, windows, tires, headlights etc. 
5. You can apply Marine to all exterior surfaces of the vessel; paint, gel coat, windshield, vinyl, brightwork etc. 
6. Do not spray product excessively onto surface, e.g. 3-6oz Recharge per standard sized car. 32 oz Marine will do approx. 3 coats per 20-25’ vessel. 
7. Clean wipers from any overspray. 
8. Always use clean, dry microfiber towels only! 
9. Do not apply in direct sunlight, strong winds or extreme heat. 
10. Store product in a climate-controlled environment.
11. Apply 2-3 layers of Recharge (waiting 5-7 days between each application) for maximum results.


NOTE: Always use clean towels. Microfiber towels are recommended.


Seems like you're in . (This is our US/CA store)

Would you like to go to our store?