HydroSilex Products Installation Instructions

In this page you will find installation and recommended usage instructions for HydroSilex products. When available, we'll have instructions in video form for ease. Simply navigate the page to find your product of choice.

Ceramic Coating

Recommended usage instructions for HydroSilex Recharge

Surface Prep

Recommended usage instructions for HydroSilex Rewing surface prep.

Glass Cleaner

Recommended use for HydroSilex Glass Cleaner.

Recommended Use

Spray glass with a fine light mist of HydroSilex Ceramic Glass Cleaner. Make sure the glass is cool to touch in order to avoid streaks. Use a clean and dry microfiber towel to spread the solution over the entire surface of the glass. To finish it off, wipe to absorb any remaining solution and buff the glass to a perfectly streak-free shine.

Waterless Wash

Recommended usage instructions for HydroSilex Ceramic Waterless Wash.

Recommended Use

Work in the shade. Spray HydroSilex Ceramic Waterless Wash on vehicle surface, working in small manageable areas. Fold a microfiber towel over to create multiple wiping surfaces. Lightly run the microfiber towel over the surface to pick up surface particles. Turn the towel over and spray the vehicle surface again. This time wipe with slightly more pressure. Continue spraying and wiping with a clean side of the towel until the surface is clean.

Ceramic Coating

Usage instructions for HydroSilex Industrial Ceramic Coating.

Recommended Use

Make sure areas to be treated are clean and cool. Use an industrial strength decontamination, oil and residue remover to ensure the surfaces to be treated are as clean as possible. Apply HydroSilex Industrial with a microfiber towel. Spread evenly and level all excess. Wait 2 hours between coats in order to layer the product for increased durability and protection.

Ceramic Coating

Usage instructions and recommendations for HydroSilex Marine Ceramic Coating.

All Purpose Cleaner

Recommended use for HydroSilex All Purpose Cleaner.

Recommended Use

Apply directly to surfaces and simply wipe off. For light duty cleaning jobs, all you need is HydroSilex All Purpose Cleaner and a microfiber towel or a sponge. For tougher jobs, allow a few seconds for the detergent to penetrate. Scrub as necessary until the area is clean. Rinse thoroughly with running water or a wet microfiber towel.

No Touch
Wheel Cleaner

Recommended use for HydroSilex Wheel Cleaner.

SIO2 Infused
Silica Soap

Recommended use for HydroSilex Silica Soap before ceramic coating or for maintenance.


Very thorough cleaner for interior plastic, leather, and vinyl surfaces.

Recommended Use

Make sure the areas to be cleaned are cool to touch. Spray an even mist on surfaces you will be working on. Work the solution into the surface while wiping gently. The longer the cleaning solution is in contact with the surface to be prepped, the more effective it will be. Repeat as needed to achieve a clean surface.